Do not crank too much on these connections. If you do you may bend the metal brake lines and then have to replace them as well. Instead, drain the line by cutting the brake hose and use a torch to heat the connection. This will break it loose and you can remove it. [2] X Research source
There are also pressure bleeders and gravity bleeders available for bleeding brakes. [7] X Research source If you run into any issues during this process, get a certified mechanic to help you out. If this is done incorrectly, your brakes won’t work, which is a serious safety hazard. This is a job best left to a pro.
The distribution blocks can be identified by the multiple brake lines running into them. They mounted near the front and rear of the vehicle and serve to distribute brake fluid from the main line to each of the wheels.
Before you drive your car, have a certified mechanic inspect the brake system. If you’ve missed anything or made the wrong connections, your brakes could give out, which could seriously injure you or others.
