If you’re using a Juice Pack Connect, flip your phone over and align the battery next to the battery anchor with the green side down. Then, slide the battery left over the anchor until it clicks into place. If you have a Juice Pack Access, Air, or standard Juice Pack, snap your phone into the battery case securely.
Charging your case wirelessly is significantly slower than doing so with a cable. [3] X Research source If you need a faster charge, use the USB-C cable instead.
If you have a Juice Pack Connect, you can remove the rechargeable battery once charged and keep it in a safe place until you need it.
If you’re using a Juice Pack Connect, flip your phone over and align the battery next to the battery anchor with the green side down. Then, slide the battery left over the anchor until it clicks into place. If you have a Juice Pack Access, Air, or standard Juice Pack, snap your phone into the battery case securely. If you don’t want to charge your phone at the same time as you charge the Juice Pack Connect, you don’t need to attach it to the phone first—just connect the USB-C cable directly to the battery and then to a power source. When the battery is charged, you can use it to charge your phone.
Your phone’s charging port will remain available while you charge the battery pack—however, charging your phone through its own charging port will not charge the Juice Pack case. If you have a Juice Pack Connect, you can remove the rechargeable battery once charged and keep it in a safe place until you need it.
If you have a phone connected to your Powerstation’s Priority Pass-Through port, your Powerstation will not start to charge until the connected device reaches its maximum charge level. The Priority Pass-Through port has an icon of a battery with two horizontal arrows and a lightning bolt. If you just want to charge the Powerstation, make sure nothing is connected to that port.
