Typically, this is all you need to do to clean the interior of your printer. If you can’t find your manual, you can locate it online by searching the type of printer you have and “manual. ”
When the menu opens, select whichever of these appears: “Maintenance”, “Utility”, “Toolbox”, or “Properties. ” The term will vary depending on what type of printer you have. Next, select the cleaning option.
If the ink still looks smudged or the paper jams, run the cleaning program again.
You may need to rotate the printer so that you are able to see the bottom, where the rollers are typically located. [4] X Research source
Distilled or filtered water works best, but any clean water should be fine.
On laser printers, you might not be able to manually rotate the rollers. Don’t worry, you can easily unsnap the clips holding the rollers in place and remove them. Just put them pack and fasten the clips after you’ve wiped the rollers clean. Wipe the rollers dry with the dry part of the towel.
If you still have printing issues, try cleaning the rollers again.
The water should be just a little warmer than room temperature.
If your printer doesn’t print a test page, check your manual to see how to run one.
