It may be a good idea to unplug the razor entirely. You don’t want to accidentally switch it on while you’re trying to clean it!
Give the detached cutting head a light tap against the edge of your sink to remove hair clippings that have compacted inside. Just be careful not to damage the delicate blades or cutting foils, as these can easily be warped out of shape. [4] X Research source
Use smooth sweeping motions to dislodge debris without applying too much force to the cutting surface. [7] X Research source If the cutting head of your razor is washable, run it under the faucet and dry it gently with a towel.
Make an effort to brush your razor’s cutting head clean each and every time you shave. [9] X Research source
Many newer electric razors come equipped with a separate docking base that cleans and charges the razor automatically. This is the easiest way to keep your shaver cleaned and maintained. Keep your razor’s dock at a safe distance from the sink or shower to prevent it from getting wet. [11] X Research source
If your razor has a protective cap over the cutting head, be sure to remove it prior to docking. Follow the instructions specified in the user’s manual if you’re unsure how to proceed. [13] X Research source
The different cleaning options will likely include a quick, normal and intensive setting. Each subsequent setting will offer a more thorough clean, but will also take longer to complete. [15] X Research source In addition to cleaning the blades or foils, the dock will also typically apply a fresh coat of lubricating oil and rapidly dry the razor using an internal heat source.
Your razor will be ready for use as soon as the automated cleaning cycle is complete. Invest in an inexpensive storage bag or hard-shelled case for your razor to keep it from being exposed to moisture and other elements that could speed its deterioration.
Assuming you don’t own a self-cleaning model and it’s been awhile since the last time you gave your razor a thorough cleaning, your best bet will be to break the razor down and manually clean every accessible part.
Cleaning the blades with soap will help cut through the congealed oil and skin residue that has a tendency to accumulate inside the cutting mechanisms. Avoid getting any pieces that are directly connected to the battery or electrical input wet.
Use a corner of the washcloth to scrub the edges of the frame beneath the cutting head. Remove as much debris as possible. Any particles left behind could be pulled back into the blades once the cutting head is reattached.
Avoid using a hair dryer or any other artificial means to speed up the drying process. This may result in irreparable damage to your razor.
