Never drag an upright or full sized canister vacuum across your floor to suck up debris. Instead, suck up abrasive debris that might scrape your floors, such as dirt and gravel, with a handheld vacuum. Remove dirt and debris from your floors with a dry dust mop.
To deep clean your floors, you may use an automatic scrubber with disk brush attachment.
Oil-based stains darken the stone and must be removed with chemicals. Blot the stain with a clean cloth to remove any excess residue. To remove the stain, use a soft liquid household cleaner, such as ammonia, acetone, or detergent. Apply the product to the stone on a damp cloth. Place the cloth over the stain to draw out the oil-based product. Organic stains, such as those caused by coffee, juice, urine, and food, turn the travertine pink or brown. Remove these stains with a mixture of 12% hydrogen peroxide—food grade hydrogen peroxide—and a few drops of ammonia. [2] X Research source Apply the product to the stone on a damp cloth. Place the cloth over the stain to draw out the organic stain. The method for removing ink stains varies based on the color of the stone. If the stain is on a light colored stone, use bleach or hydrogen peroxide; if the stain is on a dark colored stone, it is best to use acetone or lacquer thinner. Apply the product to the stone on a damp cloth. Place the cloth over the stain to draw out the ink stain. To remove water stains, buff the blemish with #0000 steel wool. Before you can remove etch marks, you must thoroughly remove the acid that caused them. Once the acid is removed, wet the surface and use a buffing pad to apply marble polishing powder. Buff and polish until the marks are gone.
Once a year, seal your countertops. This layer of protection will prevent stains from setting.
Spray the surface with a gentle cleaner that is safe on natural stone. Don’t use chemicals that are not designed to clean stone: they can damage the sealant and even leave permanent stains. Wipe up the cleaner with a fresh microfiber rag. Polish the surface with a new microfiber cloth. [3] X Research source
Maintaining this daily routine will make it easier to clean your travertine shower. To eliminate soap scum, switch from bar soap to liquid soap.
Spray the walls and shower door with a gentle cleaner. Allow the product to sit for 5 to 10 minutes. Buff the travertine stone, glass, and metal fixtures with a clean microfiber cloth. Eradicate mineral build-up with a stone scrub, an abrasive cleaner that should be used with caution on polished surfaces. Spray the treated area with a gentle cleaner and blot with a microfiber cloth.
Treat your walls with a soap film remover to remove soap scum build up. Allow the product to sit for a few minutes before polishing it off with a microfiber rag. Target mildew and mold in your shower with a mild mildew remover. After allowing product to sit for a few minutes, remove the residue with a clean microfiber rag. Examine your grout and search for cracks and holes. If you discover any missing grout, repair it immediately—cracks and holes in the grout may lead to extensive water damage. Allow the repaired grout to cure for 7 to 10 days. Observe the tiles for discoloration. If you spot a dark tile that was once light, this is a sign of water absorption. Apply a sealer to your shower.
