You can clean with any type of cloth, but microfiber cloths grab onto dust the best.
A few well-known wood cleaning products are Magic Cabinet and Wood Cleaner, Murphy’s Oil Soap, and Method All-Purpose Spray. You can purchase a cleaner at a home improvement store or most supermarkets.
You can use a cloth, microfiber cloth, sponge, paper towel, or rag. Although the cleaner should be okay, test it on a small spot of the woodwork to be sure.
If you are cleaning items cabinets or doors, don’t forget to clean the sides that are not in front of you. You can wear cotton or rubber gloves while cleaning if you are worried about skin irritation.
It shouldn’t be necessary to wash the surface off with water once cleaner has been used on it. The woodwork should take only a few minutes to dry.
Make sure you are using the right type of vinegar. Vinegars, like cider vinegar, can damage the woodwork. Test a spot of solution on the woodwork before cleaning to be sure. Vinegar can leave behind a strong smell that lasts for a while. That is why essential oils are used to provide a better smell.
It is important to ring out the cloth before cleaning because excess water can damage the woodwork if it penetrates the finish. You can use a cloth or rag to clean. A sponge can be used, but it retains water, which could damage the wood.
You can keep a bucket with the cleaning solution next to you even if you are using a spray bottle.
If you clean again, make sure to buff the surface again and allow it to dry.
This method works best on woodwork that has been painted, enameled, or varnished. Detergent may turn lacquer and shellac white as they absorb water. [8] X Research source
Make sure to test the detergent on a small, hidden part of the woodwork. If it mars the surface, try another method of cleaning.
Do not allow the detergent to sit for too long, or excess water will soak into the wood.
You should completely dry the woodwork on your own rather than leaving it to dry.
